instal the new version for apple RAMExpert 1.23.0.47

Mac Pro (2019)īottom: Unlocked position (dots do not match)Ĭonnect the power cable, display and any other peripherals. Reinstall the housing or top coverįollow the steps to reinstall the housing on Mac Pro (2019) or the top cover on Mac Pro (Rack, 2019).

If you don’t replace the DIMM covers, system performance may be affected. Push down on the left-hand side of the covers until they click into place. The DIMM ejectors will click into place once the DIMM is fully seated. Insert the DIMM gently until the bottom edge of the DIMM is touching the gold contacts, then apply more force to fully seat the DIMM.

If the DIMM doesn’t insert, verify that the notch and connectors are aligned with the notch in the DIMM slot.ĭon’t rock the DIMM into the seated position.ĭon’t bend or twist the DIMM when you insert it. When you insert the DIMM, make sure you follow these guidelines:ĭon’t force the DIMM. Make sure the DIMM is aligned with the slot before applying any force to insert it. Hold the DIMM ends gently and insert it into the slot. If possible, use canned air to blow dust out of the DIMM slot. Place the removed DIMMs into an electrostatic discharge (ESD) protective bag. Don’t twist or force the DIMM out of the socket as damage may occur. Use your thumb and index finger from each hand to gently grip the DIMM at each end, then carefully remove the DIMM by pulling the DIMM straight out of the DIMM slot. Push down on the DIMM ejectors on each end of the DIMM, which slightly raises the DIMM out of the slot. Slide each lock to the left to unlock and open the DIMM covers. Before you can install memory, you may need to remove some of the DIMMs to match a supported configuration or to meet mixed capacity R-DIMM installation requirements. Your Mac Pro comes with DIMMs preinstalled in some or all of the DIMM slots. Push in the top of the latches, then pull the latches to remove the access door. To avoid generating static, don’t move around the room until you’ve finished installing memory and have installed the access door back onto the computer.

Always discharge static before you touch parts or install components inside your Mac Pro.

Instal the new version for apple RAMExpert 1.23.0.47